Journal of the Japan Society of Powder and Powder Metallurgy
Online ISSN : 1880-9014
Print ISSN : 0532-8799
ISSN-L : 0532-8799
Shrinkage Kinetics during Sintering W-Ni-Fe-Heavy Alloy with Ultrafine Grain
Liying ZhangYuxin TanTao LinZhimeng GuoChengyi WuQinghua Wu
Author information
JOURNAL OPEN ACCESS

2003 Volume 50 Issue 11 Pages 912-915

Details
Abstract
The characteristics of shrinkage kinetics curve of compacts of W-(Ni-Fe)10% with particle size less than 200 nm sintered in hydrogen atmosphere was researched by high temperature dilatometer. And the influence of the particle size of W and green density on commence shrinkage temperature, sharp shrinkage temperature and shrinkage rate were also investigated. It shows that the commence shrinkage temperature and sharp shrinkage temperature of the compact with ultrafine grain are 970°C and 1240°C respectively. The maximum shrinkage rate is 0.11%/°C. The shrinkage ratio decreases with the increase of green density and increases with the increase of sintering temperature.
Content from these authors
© Japan Society of Powder and Powder Metallurgy

本論文はCC BY-NC-NDライセンスによって許諾されています.ライセンスの内容を知りたい方は,https://creativecommons.org/licenses/by-nc-nd/4.0/deed.jaでご確認ください.
https://creativecommons.org/licenses/by-nc-nd/4.0/deed.ja
Previous article Next article
feedback
Top