In order to clarify the mechanism of formation and growth of nodules and whiskers on the leads used in aluminum electrolytic capacitors, aluminum–tin binary alloys were subjected to the investigation as the model alloys for the joints in the leads. The concentration of tin in the binary alloys was 1, 5 or 10 at%. The alloy of 10 at% tin showed the largest number of nodules or whiskers on its polished surface after keeping under ambient conditions for 7.8 Ms. Many whiskers whose length were more than several tens of micrometers were observed in the case of the alloy of 5 at% tin. The alloy of 1 at% tin showed few nodules or whiskers. Growth of nodules and whiskers is caused by difusion of tin atoms from the strained or unstable areas into the stable ones or the root grains. Then, the extrusion toward the surface at the root grains develops nodules and whiskers. As a prevention measure of whiskers, selective etching of the aluminum phase using a solution of sodium hydroxide was confirmed to be successful. Thus the aluminum phase was thought to form a non-uniform distribution of strain in the tin phase. This acts as the driving force in difusion of tin atoms.